|
StoneTech Heavy Duty Sealer
 E-mail this product to a friend
Stone Tech Heavy Duty Sealer
Provides heavy duty “natural look” protection for all natural stone including granite, marble, limestone, travertine, slate, porcelain & ceramic tile, and grout. Formulated with advanced water-based fluorochemicals to protect against tough oil & water-based stains. Features + Benefits
- Advanced penetrating microbond protection
- Maximum protection against all stains
- Makes cleaning stone easier
- Preserves natural look
- Water-based low-solids coating
- Interior & exterior
Where to UseNatural stone such as marble, granite, limestone, slate, terrazzo, travertine & sandstone.
Directions
Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean, dry and free of waxes and coatings.
- Mask off and protect any baseboards or adjacent areas to avoid splashing and overspray onto surfaces not intended to be treated.
- Sealer may be applied to damp surfaces one hour after standing water has been removed.
- Liberally apply an even coat using a paint pad, roller or brush.
- Allow sealer to penetrate the surface for 15-30 minutes. During this time, distribute excess over entire area to insure even penetration. Wipe entire surface thoroughly with clean dry towel.
- A second coat may be needed for porous, absorbent surfaces and should be applied 30-40 minutes after initial application as directed in steps 3-4.
- A minimum of 15 minutes after final application, wipe entire surface with a clean dry towel to remove any excess sealer. If needed, dampen white nylon pad with sealer to remove residue and dry again thoroughly with clean dry towel.
- A full cure is achieved after 24-72 hours; foot traffic may begin in 6-8 hours. Cover with red rosin paper, if foot traffic must resume before the recommended time periods have passed.
- Clean equipment with water.
Available Sizes (and Coverage)
Quart: 50-400 sq. ft.
Gallon: 200-1,500 sq. ft.
Expected Wear: 3-5 years on interior surfaces & 1-3 years on exterior surfaces.
Documents:
Product Data Sheet (N/A)
Specifications (N/A)
|
